![]() There are two levers running across from the coin chute in the pictures above, and two verticals going down into the mech. They will need to be removed and cleaned (derusted), and lightly If that doesn't fix it, next up is the slides. it's just 1 or 2 screws, and the whole tubeĬomes off (coins will come out as the tube is removed, be careful).Įmpty the tube and clean it. Into the tube "on edge", instead of flat. Most problems relate to the feed tube and the slides. when a "win" is hit, some of the arms findĪ hole, and it pushes one or three "slides". the disc has a bunch of holes in it, and little arms There is also a spinning disc, to the left of the reels as facing ![]() Slides moves back, it is automatically refilled with new coin(s) by when a "hit" is made, one (or more) slides move,Īllowing the coins in that slide to fall to the payout tray. When the slides are out of place, no coins fall thru from the tube the slides have holes in them, same size as the feeding it feeds to a stack ofĪbout 6 slides, each maybe a 1/4" thick (thickness depends on the That, a tube the size of the coin, about 12" tall. ![]() The "slides", which ultimately drop the coins. this should fill with coins, and it's what feeds that's a lot more complicated unfortunately.įirst there is a pay tube.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |